Intuitive fingerprint unlock
Enjoy an easy-to-use one-touch unlocking experience! As you hold the handle, the thumb naturally falls onto the sensor. Upon a successful verification, pressing the handle may open the door, simplifying the unlocking steps.
See all benefitsIntuitive fingerprint unlock
One step to open the door
Adopting a semiconductor fingerprint sensor, the recognition speed of the Philips DDL101-3HBS is below 0.5 s*. Once you hold the handle, the finger may naturally fall onto the recognition area to get a one-grip unlocking, giving you a practical and quick door-opening experience.
After binding with the Tuya Smart App, Philips DDL101-3HB can be opened by clicking the unlock button on the App, and users can also check the door lock's records such as battery level and operation logs via the App*.
DDL101-3HBS has two modes available, general mode and passage mode. In the general mode, after a successful fingerprint verification, pressing down the handle can unlock the door; In the passage mode, without fingerprint recognition, you can press down the handle to open the door, and that saves time and power consumption to avoid repeatedly unlock in a short period. Both modes can switch to each other to meet your exact needs.
When there is a consecutive 5 incorrect fingerprint verifications, the door lock will trigger an alarm and lock for 3 minutes, but it will automatically be lifted after 3 minutes, which can effectively deter the suspicious verification behaviors and prevent the door unlocking.
Fitted with a thumb turn on the indoor escutcheon, rotating the thumb turn on the DDL101-3HBS can lock the door from the inside. Once the door is locked from inside, only the mechanical key can open the door, which helps to keep privacy in hearts and souls.
Abandoning the thick and solid escutcheon design, the DDL101-3HBS has an ergonomic design with a fingerprint integrated into the handle, you will only need to have one touch on the fingerprint sensor to unlock the door, which simplifies the unlocking steps. It is suitable for wooden doors between 35 and 60 mm thick, such as interior doors, office doors, etc.
When the door lock is at a low battery level, you can use a rechargeable battery to insert into the built-in Type-C interface to power up the lock and unlock the door with the fingerprint. When the battery level is low, please replace the battery with a new one to avoid the battery running out and fail to get the mechanical key to open the door.
Design & Appearance
Obsidian black
Aluminium alloy
Access Solution
Yes
Yes
Yes
Design & Appearance
Obsidian black
Aluminium alloy
Access Solution
Yes
Yes
Yes
Power Specification
4 AAA batteries
Alkaline Batteries
10 months*
5V power bank
Installation
30-60 mm
Other range*
Left inward opening
Left outward opening
Right inward opening
Right outward oepning
Wooden door